西南某岩溶区地下水系统示踪试验与解析     

张浪  李俊  潘晓东  黄晓荣  彭聪 《中国岩溶》2020,39(1):42-47

以西南某典型岩溶区为例,解析示踪试验在岩溶管道连通性以及获取水文地质参数中的应用。选择落水洞为投放点,分别从落水洞西侧和东侧寻找地下水出露点作为接收点,判别落水洞地下径流的实际去向以及落水洞与接收点之间的水力联系。结合Qtracer2软件对示踪试验成果进行定量解析,确定示踪剂回收率、地下水平均流速、最快流速,估算出岩溶管道结构特征和水文地质参数。结果表明:落水洞与接收点JS01、JS03之间不存在直接水力联系;落水洞与接收点JS02存在水力联系且岩溶管道极为发育,含水介质不均匀,地下水运移路径较为通畅,为典型的紊流流态;落水洞地下径流的主要方向是由西向东,但在丰水期雨量较大期间,接收点JS04能够接收到荧光素钠,说明丰水期水位上涨后两者间会有水力联系,导致部分水量向落水洞西侧排泄。  相似文献   

Two-stage permutation tests for determining homogeneity within a spatial cluster     

Qiliang Liu  Wenkai Liu  Min Deng  Yaolin Liu 《International journal of geographical information science》2019,33(9):1718-1738

The discovery of spatial clusters formed by proximal spatial units with similar non-spatial attribute values plays an important role in spatial data analysis. Although several spatial contiguity-constrained clustering methods are currently available, almost all of them discover clusters in a geographical dataset, even though the dataset has no natural clustering structure. Statistically evaluating the significance of the degree of homogeneity within a single spatial cluster is difficult. To overcome this limitation, this study develops a permutation test approach Specifically, the homogeneity of a spatial cluster is measured based on the local variance and cluster member permutation, and two-stage permutation tests are developed to determine the significance of the degree of homogeneity within each spatial cluster. The proposed permutation tests can be integrated into the existing spatial clustering algorithms to detect homogeneous spatial clusters. The proposed tests are compared with four existing tests (i.e., Park’s test, the contiguity-constrained nonparametric analysis of variance (COCOPAN) method, spatial scan statistic, and q-statistic) using two simulated and two meteorological datasets. The comparison shows that the proposed two-stage permutation tests are more effective to identify homogeneous spatial clusters and to determine homogeneous clustering structures in practical applications.  相似文献   

Test and analysis of reinforced concrete (RC) precast shear wall assembled using steel shear key (SSK)     

Shao-Dong Shen  Peng Pan  Qi-Song Miao  Wen-Feng Li  Run-Hua Gong 《地震工程与结构动力学》2019,48(14):1595-1612

Reinforced concrete (RC) precast shear walls are extensively applied in practical engineering, owing to their fast construction speed. However, because of the transport conditions, RC precast shear walls have to be separated into small wall segments during the factory prefabrication procedure before being assembled on site. Typically, wet-type jointing methods are adopted to link the segments, which is time-consuming and results in unreliable post-pouring area strength. To overcome this problem, the novel scheme of the steel shear key (SSK) featuring steel shear panels and combined fillet and plug welding is proposed. Three RC precast shear wall specimens with different linking strength, termed as weakened SSK wall, standard SSK wall, and strengthened SSK wall, respectively, and an integrated shear wall specimen were designed. Quasi-static cyclic loading was applied to investigate the specimens' dynamic properties. The test results suggest the prefabricated wall segments equipped with SSKs showed reliable stiffness and bearing capacity and were improved in energy dissipation ability, compared with conventional shear walls. As the shear stiffness and number of equipped SSKs increased, the specimens exhibited higher strength, but their ductility and energy dissipation were slightly decreased. Most importantly, the standard SSK wall specimen could achieve satisfactory bearing capacity and deformability and is thus recommended for precast building structures. Finite element method (FEM) models were established to validate the test results, and parametric study analysis was conducted based on the coupling ratio of the SSK walls. Finally, an appropriate coupling ratio range is recommended for practical engineering applications.  相似文献   

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests     

Junwei Zhang  Qiusheng Li 《地震工程与结构动力学》2019,48(15):1678-1698

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.  相似文献   

高烈度区双洞隧道洞口段地震响应分析与振动台模型试验          下载免费PDF全文

皇民  苑俊杰  赵玉如  毕洁同  王松 《中国地质灾害与防治学报》2020,31(1):113-119

强震作用下,隧道地下结构损伤严重,其中洞口段更是抗震的薄弱环节,但其影响规律和特点目前尚缺乏系统的计算分析和研究。以强震区扯羊隧道为例,首先采用FLAC3D对双洞隧道洞口段地震响应进行分析,再用模型试验的方法进行洞口段模型试验,测量其地震响应应变规律,观测其震害发展情况,并与数值分析结果相互验证。结果表明:地震作用下,隧道仰拱横向位移较大;随着隧道埋深增加,内力逐步增加,其中墙角部位内力较大;洞口处隧道围岩在强震作用下会产生贯通性裂缝,影响隧道洞口稳定;地震作用下的明洞与暗洞交接处内力较大;地震作用下的双洞隧道之间存在较强的动力相互作用。  相似文献   

稻壳灰加筋土力学性能研究     

李丽华  余肖婷  肖衡林  马强  刘一鸣  杨星 《岩土力学》2020,41(7):2168-2178

稻壳灰与土体混合应用，一方面废弃资源再利用，环保，又可增强土体强度。通过三轴试验，研究不同比例稻壳灰混合黏土及其加筋土应力?应变性能、强度特性以及不同应变水平下模量、偏应力及加筋强度比等土体变化特征。试验结果表明，随稻壳灰比例增加，混合土最大干密度显著减小，最优含水率显著增加。添加不同比例稻壳灰对加筋土抗剪强度有较大影响，10%～15%稻壳灰比例下，加筋稻壳灰混合土初始切线模量和应力峰值达到最大，抗剪强度较优。与土工织物加筋稻壳灰混合土相比，土工格栅加筋稻壳灰混合土偏应力及抗剪强度更大，土工格栅层数对土体抗剪强度增大效果更明显，对应的应力?应变曲线拐点也更突出。试样弹性模量与稻壳灰比例及筋材种类、层数有关，加入稻壳灰后，土体弹性模量增长显著，土工格栅加筋稻壳灰混合土较优比例下可增加1.5倍多，稻壳灰及筋材均能有效提高土体强度。随加筋层数增加，稻壳灰混合土加筋强度比明显增大，与围压关系较小。  相似文献   

多功能水合物沉积物三轴试验系统的研制与应用     

周家作  韦昌富  魏厚振  杨周洁  李力昕  李彦龙  丁根荣 《岩土力学》2020,41(1):342-352

研制了新型多功能水合物沉积物三轴试验系统，系统由供-排气模块、应力加载模块、温控模块、数据采集模块和辅助模块组成。利用泵驱动高压液体施加围压和轴压，加载方式有恒压、恒流、梯度增压、跟踪气压模式，可以实现不同条件下的水合物合成、三轴剪切。围压跟踪气压的功能使水合物生成过程中净围压不变，保证了试样初始条件一致性。根据围压液体积变化测量试样体积变形，通过设置回压泵压力变化方式控制水合物气压，可以模拟不同降压速率条件下的水合物沉积物分解变形。以泥质粉细砂和二氧化碳为材料制作了三轴试样，进行了水合物合成、三轴剪切和降压分解试验，检验了仪器的可靠性。  相似文献   

岩石铷-锶和钐-钕同位素标准物质的研制     

唐索寒  李津  潘辰旭  刘辉  闫斌 《岩矿测试》2021,(2):285-295

通常样品的⁸⁷Sr/⁸⁶Sr和¹⁴³Nd/¹⁴⁴Nd同位素比值分析采用SRM9⁸⁷、JNdi-1作为标准物质,它们分别是纯的碳酸盐和氧化物,适用于监控质谱测试过程。中国现有的钐-钕地质和铷-锶年龄标准物质,分别为玄武岩和钾长石,它们与很多地质样品的基质存在差别。仅有这两种基质的标准物质不能有效地监控不同地质样品Rb-Sr、Sm-Nd同位素分析过程,因此研制不同岩性的Rb-Sr、Sm-Nd同位素标准物质具有重要现实意义。本文采集中国典型地区的橄榄岩、榴辉岩和花岗岩作为候选物,严格按照《一级标准物质技术规范》(JJF 1006-1994)和《标准物质定值的通用原则及统计学原理》(JJF 1343-2012)等相关标准物质国家计量技术规范和国家标准,研制了橄榄岩、榴辉岩和花岗岩铷-锶、钐-钕同位素标准物质(编号为GBW04139、GBW04140、GBW04141),其中橄榄岩标准物质适用于高Mg、Fe,低Rb、Nd含量样品的分析,榴辉岩和花岗岩标准物质适用于含有难溶副矿物的岩石样品的分析。每个标准物质具有6个特性量值,Rb、Sr、Sm和Nd含量分布分别为0.16~64μg/g、12~560μg/g、0.1~3.2μg/g和0.3~15.3μg/g,⁸⁷Sr/⁸⁶Sr比值分布为0.70446~0.71309,¹⁴³Nd/¹⁴⁴Nd比值分布为0.51115~0.51267,同位素比值精度达到或优于同类标准物质。这些特性量值更接近实际样品,使用时将更加有效和方便。该系列标准物质可用于校准仪器和评价方法,并能有效监控实验室此类样品的铷-锶、钐-钕同位素分析过程。  相似文献   

青藏高原西部阿汝冰芯记录的近100 a气温变化研究   总被引：2，自引：2，他引：0  

杨丹丹  姚檀栋  邬光剑  朱美林  德吉 《冰川冻土》2021,43(1):124-134

以2017年9月钻取自青藏高原西部阿汝冰崩区长度55.29 m的阿汝冰芯为研究对象,通过冰芯δ¹⁸O记录与Nye模型重建了冰芯上部17.87 m的时间序列是1917—2016年。结合冰芯邻近的改则、狮泉河气象站1973—2016年夏季平均气温数据,通过相关性分析及线性回归法、Mann-Kendall（M-K）检验分析,发现冰芯与气象站记录的过去44年气温显著升高;根据M-K突变检验得出,20世纪80年代是气温变化由高—低—高的转折时期,且阿汝冰芯记录的突变年份1981年前后气温上升约1.97 ℃。同样地,采用线性回归法、M-K检验分析阿汝冰芯与邻近的古里雅冰芯共同记录的1917—1991年气温变化情况,发现两支冰芯记录的75年间气温变化总体呈上升趋势;根据M-K突变检验得出,升温始于20世纪30年代中后期并于50年代达到显著升温的趋势,且阿汝冰芯记录的突变年份1949年前后气温上升了约1.1 ℃。阿汝冰芯与气象站和古里雅冰芯记录的气温变化具有一致的升温趋势,但阿汝冰芯记录的增温幅度比气象站记录高,同时比古里雅冰芯记录的增温幅度小。  相似文献   

基于微纳气泡示踪的拖曳法ADCP流速测试   总被引：1，自引：0，他引：1  

韩继伟  邵军  符伟杰  赵士伟  毛春雷  房照娟 《水文》2021,41(2):63-68

声学多普勒剖面流速仪(ADCP)设备在水文领域保有量大、应用广,但如何对其进行量值溯源,确保现场测量数据准确可靠是用户非常关注的问题。分析ADCP的测试现状,阐述ADCP的6个测试参数,分析出流速测试是核心;利用微纳气泡作为示踪粒子,尝试解决静止水体无反射粒子的问题,为ADCP流速测试提供支撑;以TRDI的WHR600-1型ADCP为例,说明ADCP流速测试过程和试验数据处理方法。得出微纳米气泡是ADCP拖曳水槽水跟踪测试较好的示踪物质,进而实现ADCP水跟踪流速测试。为拖曳水槽ADCP测试改造建设提供技术思路,并给出实验室测试建议。  相似文献